{"product_id":"terunsoul-obd-step-down-cable-14-9ft","title":"TERUNSOUl OBD Step-Down Cable (14.9ft)","description":"\u003cp\u003eProduct Introduction\u003cbr\u003eThe TERUNSOUl OBD Step-Down Cable is a smart power supply cable designed specifically for dashcams. It draws power from the vehicle's OBD interface (on-board diagnostic port), eliminating the need to remove the fuse box; it's plug-and-play, easily enabling 24-hour parking monitoring. A built-in low-voltage protection chip automatically cuts off power when the battery voltage drops below a preset threshold, preventing the vehicle from failing to start.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003cbr\u003eOBD Direct Plug, Non-destructive Installation\u003cbr\u003eNo wire cutting or searching for the ACC fuse is required. Simply plug it into the vehicle's OBD interface (usually located under the steering wheel) to instantly provide continuous power to the dashcam.\u003c\/p\u003e\n\u003cp\u003eIntelligent Low-Voltage Protection\u003cbr\u003eReal-time monitoring of battery voltage. Automatically cuts off power when the voltage drops below 11.6V \/ 23.2V (automatic recognition for 12V\/24V models), prioritizing vehicle starting.\u003c\/p\u003e\n\u003cp\u003eWide Voltage Compatibility\u003cbr\u003eSupports 12V–24V vehicle models, suitable for most gasoline and new energy vehicles, including sedans, SUVs, trucks, and vans.\u003c\/p\u003e\n\u003cp\u003eThree-Wire Output Design\u003cbr\u003eProvides an ACC signal wire, a constant wire, and a ground wire, compatible with the parking monitoring trigger logic of mainstream dashcams (some dashcams require ACC wake-up).\u003c\/p\u003e\n\u003cp\u003ePlug and Play, No Setup Required\u003cbr\u003eWorks immediately upon plugging in, no additional configuration required. Outputs a stable 5V\/2.5A current, compatible with most dashcams.\u003c\/p\u003e\n\u003cp\u003eSafe Materials\u003cbr\u003eThe cable uses a pure copper core and flame-retardant outer sheath, with a built-in fuse and automatic overcurrent and overheat protection, ensuring safety and reliability.\u003c\/p\u003e\n\u003cp\u003eApplicable Scenarios\u003c\/p\u003e\n\u003cp\u003e✅ Dashcam users who need 24-hour parking monitoring\u003c\/p\u003e\n\u003cp\u003e✅ Car owners who don't want to remove the fuse box and prefer a non-destructive installation\u003c\/p\u003e\n\u003cp\u003e✅ Vehicle OBD port is available and easily accessible\u003c\/p\u003e\n\u003cp\u003e✅ Compatible with TERUNSOUL series dashcams (such as D019, D018, etc.) and most mainstream brand dashcams\u003c\/p\u003e\n\u003cp\u003eHow to Install?\u003c\/p\u003e\n\u003cp\u003eConfirm that the dashcam supports parking monitoring (ACC detection or time-lapse recording mode is required).\u003c\/p\u003e\n\u003cp\u003ePlug the OBD connector into the OBD port below the steering wheel.\u003c\/p\u003e\n\u003cp\u003eRoute the output cable along the door frame or interior trim seam to the dashcam location.\u003c\/p\u003e\n\u003cp\u003ePlug the dashcam into its power connector.\u003c\/p\u003e\n\u003cp\u003eStart the vehicle and check if the dashcam starts normally; after turning off the engine, the dashcam should automatically enter parking monitoring mode (requires dashcam support).\u003c\/p\u003e\n\u003cp\u003eSome models have a constant power OBD port, while others have ACC power supplied with the engine. This step-down cable can automatically adapt, providing power even after the engine is off, with recording controlled by the dashcam's own logic. Package Contents:\u003cbr\u003eTERUNSOUl OBD Step-Down Cable × 1\u003c\/p\u003e\n\u003cp\u003eCable Clips × 3\u003c\/p\u003e\n\u003cp\u003eInstruction Manual × 1\u003c\/p\u003e\n\u003cp\u003eWarranty Card × 1\u003c\/p\u003e\n\u003cp\u003ePrecautions:\u003c\/p\u003e\n\u003cp\u003ePlease ensure your dashcam supports parking monitoring and that its power interface is compatible with this product.\u003c\/p\u003e\n\u003cp\u003eThis product is for dashcam power only. Do not use it with other high-power devices.\u003c\/p\u003e\n\u003cp\u003eFor long-term parking (more than one week), it is recommended to unplug the OBD connector to avoid accumulating small power consumption.\u003c\/p\u003e\n\u003cp\u003eIf the vehicle's OBD interface is already occupied by other devices (such as HUD, vehicle monitoring system), an OBD 1-to-2 adapter can be purchased.\u003c\/p\u003e\n\u003cp\u003eAbout TERUNSOUl:\u003c\/p\u003e\n\u003cp\u003eTERUNSOUl focuses on dashcams and automotive accessories, providing complete solutions from main unit to power accessories. Our OBD step-down cables undergo rigorous testing to ensure stability and safety.\u003c\/p\u003e\n\u003cp\u003eLet your dashcam protect your car 24\/7.\u003c\/p\u003e","brand":"TERUNSOUL","offers":[{"title":"Default Title","offer_id":45570251260083,"sku":"0BDJYX-4.5m","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0741\/2170\/7699\/files\/OBD.jpg?v=1781249219","url":"https:\/\/www.terunsoul.com\/pt\/products\/terunsoul-obd-step-down-cable-14-9ft","provider":"TERUNSOUL","version":"1.0","type":"link"}